Elkins Metal Recycling, Elkins, West Virginia

Tags: ,

In an effort to provide you, the customer, with the best possible service to meet your scrap needs, we offer the following:

  • Rollback for automobile removal
  • Demolition
  • Pick truck
  • MSHA certified torch operators and equipment operators
  • On site cutting of large items
  • We have scrap containers available for your commercial facility
  • “In House” self dumping hoppers


Specifications for various grades of scrap metals are as follows:

  • Prepared #1 HMS – Any metals smaller than 2′ x 3′ in size. NO non-ferrous attachments, such as lead, aluminum, brass or copper. NO sealed containers, such as car shocks, torque converters, belt rollers and tanks. Any sealed container which has two holes burned into the item, at least the size of a fifty cent coin are acceptable. NO excess grease, oil or other contaminants.
  • Prepared Plate & Structural (P&S) – I-beam, channel, angle, plate, pipe, minimum 1/4″ thickness, no larger than 2′ x 5′. Pipe cannot be larger than 8″ diameter. No non-ferrous attachments.

We do not split weigh prepared grades. All material in a prepared load must be fully prepared.  Unprepared loads will be paid at the rate of the lowest grade in the load.

Batteries must be whole, free from defect and must have caps in place.

We do not accept tires, fluids, cylinders which contain any kind of gasses, (propane, acetelyne, etc.), or refrigerators / ac units containing freon.

101 15th Street, Elkins WV 26241 | Phone: (304) 636-3456 | Fax: (304) 636-3491